Machined & Customized Seals
In general most of the available axial and radial sealing profiles can be manufactured by machining. This production method can be cost and/or lead time effective where limited quantites or short delivery times are required.
Seals can also be manufactured to fit non-standard seal grooves.
Reworking damaged seal grooves/seal surfaces and manufacture a customized seal instead of replacing expensive components, can reduce cost and lead times significantly.
We can machine parts in various materials: NBR, HNBR, FKM / FPM / VITON, FFKM, AFLAS, PTFE, EPDM, PEEK, PCTFE, POM, PA, PE, PEHD, PU, PUR, TFE, TFE/P, UHMW-PE and Silicone.
.png){kind=small}
Lorem ipsum dolor sit amet, cons ectetur adipiscing elit. Cras mollis lacus ipsum dolor.
Standard O-rings and back-up rings, metric and imperial sizes can be delivered in a large variety of materials.
We can also supply: O-ring Lube, O-ring cord, X-ring/Quad-ring, Vulcanized O-ring, Spliced O-ring, Encapsulated O-ring and Oring sets. Backup rings including; Parbak back-up rings, machined back-up rings i different materials, Solid (uncut) Single Turn (scarf cut) and Spiral (multiturn) back-up rings.
Several of the materials are available in accordance with Oil & Gas related standards. This include, but are not limited to:
• NORSOK M710
• ISO 23936-2
• API 6A
• API 16C
Standard flat gaskets and spiral wound gaskets (SPW) for flanges.
Customized gaskets for covers, hatches, manholes and similar. Can be delivered in materials like nitrile, neoprene, viton, fiber, graphite and plastics.
Spiral wound gaskets according to ASME B16.20.
Standard components for hydraulic applications.
Piston & Rod seals:
Comes in a broad range of different sealing profiles depending on application parameters.
Such as Polypaks / Polyseals, T-Seals and S-seals.
Common materials: NBR, HNBR,FKM molythane, polymyte, nitroxile, ethylene propylene, polyurethane and PTFE.
Wipers, scrapers
Several options for open and closed groove available depending on application parameters and hardware design.
Common materials: elastomers like NBR, HNBR and FKM. Thermoplastics like polyurethane, POM and PEEK.
Bearings strips and wear rings:
Common materials: Thermoplastics like PEEK and PTFE filled with bronze/carbon and Composite.
A range of standard axial and radial sealing profiles to suit a broad range of applications are available.
Sealing material: In general manufactured in unfilled/filled PTFE materials, FKM, NBR, HNBR and PUR.
Monogrammed API Ring Gaskets in accordance with API 6A and BSME B16.20.
• Standard Ring Gaskets
• R Type Ocagonal
• R Type Oval
• BX type RTJ
Norwegian Seals have partnerships with high quality machine & engineering company's in UK and Norway for producing metal components for subsea equipment.
Metal C-rings and metal O-rings in different sizes and materials for High Heat and Ultra High Pressure challenges. Can be delivered with NACE Approval.
Sub-X™ Wellhead / BOP & Production System Ring Gaskets
Manufactured in the UK by Sub-Drill, Norwegian Seals stock a variety of Sub-X™ Wellhead/BOP and Production System ring gaskets.
For three decades, Sub-drill’s Sub-X™ ring gaskets have been installed in thousands of drilling and production equipment assets worldwide for deep sea exploration and production of oil and gas.
Sub-X™ gaskets are designed for use in H4 Type VX Hydraulic Connectors for Production and Drilling Operations.
Sub-X™ VX, VGX, VX/VT & VGX/VT (VGT) Type gaskets have been qualified in compliance with API 6A and API 17D with Lloyds Register 3rd Party NOBO Type Approval Certification.
Other types of Gaskets are offered for BOP/Riser applications including AX and CX Type Gaskets, available in a range of sizes.
Sub-drill are specialists in the supply of emergency (contingency) subsea gaskets with reactive technical support for field issues, and the provision of expedited emergency sealing solutions.
Sub-X™ is a globally recognised symbol of quality, market-leading sealing technology and consistent performance.
.png)
.png)
.png)
.png)